About | Contact Us | Register | Login
ProceedingsSeriesJournalsSearchEAI
sis 25(1):

Research Article

Development of New Spray Dust Suppression Materials in Metal Mines and Prediction of Algorithm Simulation Effect

Download77 downloads
Cite
BibTeX Plain Text
  • @ARTICLE{10.4108/eetsis.6990,
        author={Bin Peng},
        title={Development of New Spray Dust Suppression Materials in Metal Mines and Prediction of Algorithm Simulation Effect},
        journal={EAI Endorsed Transactions on Scalable Information Systems},
        volume={12},
        number={1},
        publisher={EAI},
        journal_a={SIS},
        year={2025},
        month={4},
        keywords={Spray Dust Suppression, Computational Fluid Dynamics, Metal Mining, Algorithm Simulation},
        doi={10.4108/eetsis.6990}
    }
    
  • Bin Peng
    Year: 2025
    Development of New Spray Dust Suppression Materials in Metal Mines and Prediction of Algorithm Simulation Effect
    SIS
    EAI
    DOI: 10.4108/eetsis.6990
Bin Peng1,*
  • 1: Hunan Institute of Technology
*Contact email: bin_peng90@outlook.com

Abstract

PROBLEM: Dust contamination in metal mining poses substantial dangers to environmental quality and human health. Modern mining operations cannot use traditional spray dust suppression methods because they are poorly adapted to changing climate conditions, low efficient, and detrimental to the environment. INTRODUCTION: Dust pollution seriously impacts the environment and human health in metal mine operations. Traditional spray dust suppression technology has many problems, such as limited effect, environmental impact, and poor climate adaptability. OBJECTIVES: The purpose of this article is to develop a new type of spray dust suppression material and predict its dust suppression effect through algorithm simulation. Firstly, efficient and environmentally friendly dust-reducing materials were screened, and after evaluating the dust-reducing effect under laboratory conditions, the optimal material combination was determined. METHODS: Using computational fluid dynamics (CFD), a numerical model of the spray process was constructed to simulate the dust suppression effect of different materials under different climatic conditions. RESULTS: The results show that the highest dust reduction efficiency of the new spray dust reduction material is more than 4.3% higher than that of the traditional material, and it shows good stability. CONCLUSION: The new spray dust control material and its effect prediction method studied in this article provide an effective solution for dust control in metal mines, which has important theoretical value and practical application prospects.

Keywords
Spray Dust Suppression, Computational Fluid Dynamics, Metal Mining, Algorithm Simulation
Received
2025-04-11
Accepted
2025-04-11
Published
2025-04-11
Publisher
EAI
http://dx.doi.org/10.4108/eetsis.6990

Copyright © 2024 B. Peng, licensed to EAI. This is an open-access article distributed under the terms of the CC BY-NC-SA 4.0, which permits copying, redistributing, remixing, transformation, and building upon the material in any medium so long as the original work is properly cited.

EBSCOProQuestDBLPDOAJPortico
EAI Logo

About EAI

  • Who We Are
  • Leadership
  • Research Areas
  • Partners
  • Media Center

Community

  • Membership
  • Conference
  • Recognition
  • Sponsor Us

Publish with EAI

  • Publishing
  • Journals
  • Proceedings
  • Books
  • EUDL