About | Contact Us | Register | Login
ProceedingsSeriesJournalsSearchEAI
mca 19(16): e3

Research Article

Automated control signal reception acknowledgement system using nRF24L01P wireless transceiver module and Arduino

Download2781 downloads
Cite
BibTeX Plain Text
  • @ARTICLE{10.4108/eai.14-12-2018.159337,
        author={Mobasshir  Mahbub},
        title={Automated control signal reception acknowledgement system using nRF24L01P wireless transceiver module and Arduino},
        journal={EAI Endorsed Transactions on Mobile Communications and Applications},
        volume={5},
        number={16},
        publisher={EAI},
        journal_a={MCA},
        year={2019},
        month={1},
        keywords={Wireless system, Acknowledgement system, Microcontroller, nRF24L01 module, Arduino},
        doi={10.4108/eai.14-12-2018.159337}
    }
    
  • Mobasshir Mahbub
    Year: 2019
    Automated control signal reception acknowledgement system using nRF24L01P wireless transceiver module and Arduino
    MCA
    EAI
    DOI: 10.4108/eai.14-12-2018.159337
Mobasshir Mahbub1,*
  • 1: Department of Electronics and Communication Engineering, East West University, Dhaka, Bangladesh
*Contact email: mbsrmhb@gmail.com

Abstract

In this era of modern technology wireless control system is a most used method to control electrical or electronic devices and/or monitoring from a distant part. It is very easier and cost effective to implement a wireless system. Because there are barriers in implementing wired system. That is why wireless system is much effective than wired. But the wireless system has also some problems or deficits. One of them is signal loss during the transmission due to various causes like surrounding environmental reason and others. If transmitted signal is lost the receiver will remain completely blind as it is not receiving the signal. Another one can be the receiver is unable to receive signal due to the technical fault of receiver end whether the transmitted signal is stable. That is why an acknowledgement system is necessary to determine whether the receiver is receiving the transmitted signal or not. The developed system is an effective and low cost system with nRF24L01P transceiver module and Arduino Uno to determine that the receiver is working accordingly or not or is there any technical fault.

Keywords
Wireless system, Acknowledgement system, Microcontroller, nRF24L01 module, Arduino
Received
2018-11-07
Accepted
2018-12-22
Published
2019-01-31
Publisher
EAI
http://dx.doi.org/10.4108/eai.14-12-2018.159337

Copyright © 2019 Mobasshir Mahbub et al., licensed to EAI. This is an open access article distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/3.0/), which permits unlimited use, distribution and reproduction in any medium so long as the original work is properly cited.

EBSCOProQuestDBLPDOAJPortico
EAI Logo

About EAI

  • Who We Are
  • Leadership
  • Research Areas
  • Partners
  • Media Center

Community

  • Membership
  • Conference
  • Recognition
  • Sponsor Us

Publish with EAI

  • Publishing
  • Journals
  • Proceedings
  • Books
  • EUDL