Research Article
Technical Review of Mine Dewatering System Case Study Underground Gold Mine PT Bumi Suksesindo
@INPROCEEDINGS{10.4108/eai.30-8-2021.2311502, author={Tedy Agung Cahyadi and Sevian Anggoro and Singgih Saptono and Suyono Suyono and Indah Setyowati and Sri Sugarto}, title={Technical Review of Mine Dewatering System Case Study Underground Gold Mine PT Bumi Suksesindo}, proceedings={Proceedings of the 2nd International Conference on Industrial and Technology and Information Design, ICITID 2021, 30 August 2021, Yogyakarta, Indonesia}, publisher={EAI}, proceedings_a={ICITID}, year={2021}, month={10}, keywords={minerals technical review mine dewatering}, doi={10.4108/eai.30-8-2021.2311502} }
- Tedy Agung Cahyadi
Sevian Anggoro
Singgih Saptono
Suyono Suyono
Indah Setyowati
Sri Sugarto
Year: 2021
Technical Review of Mine Dewatering System Case Study Underground Gold Mine PT Bumi Suksesindo
ICITID
EAI
DOI: 10.4108/eai.30-8-2021.2311502
Abstract
Minerals which located below the surface of the groundwater require pumping activities to carry out the mining activities. The problem that has occurred so far is that the work front located lower than the portal causes the waters from groundwater seepage and underground mining equipment to be collected and pooled on the work front. This causes the work area to be flooded and causes the mining activities to be delayed up to 5 hours. The study of the mine drainage system is expected to evaluate the existing mine drainage system in the PT Bumi Suksesindo underground mine, including analysis of groundwater seepage, mine water discharge, sump volume, pump requirements and alternative pumping system networks. Based on several trial and error experiments, the groundwater inflow is 1,17 x 10-5 m3s-1 on average at each seepage’s location point. The recommendation to resolve the mine dewatering problems are an addition of a booster pump on sump 2 and sump 1, the dimensions of the sump has to be increased, add an airflow control valve to ensure that the source of air pressure is 3 bar, and a replacement of pump impeller to MT 231 coded impellers.