Research Article
Surface quality of Wood Plastic Composite material after machining
@INPROCEEDINGS{10.4108/eai.22-11-2017.2274317, author={Zuzana Mitalova and Vladimir Simkulet and Jozef Zajac and Svetlana Radchenko and Pavol Radic and Igor Olexa and Juliana Litecka}, title={Surface quality of Wood Plastic Composite material after machining}, proceedings={2nd EAI International Conference on Management of Manufacturing Systems}, publisher={EAI}, proceedings_a={MMS}, year={2018}, month={3}, keywords={wood plastic composite; milling; surface topography}, doi={10.4108/eai.22-11-2017.2274317} }- Zuzana Mitalova
Vladimir Simkulet
Jozef Zajac
Svetlana Radchenko
Pavol Radic
Igor Olexa
Juliana Litecka
Year: 2018
Surface quality of Wood Plastic Composite material after machining
MMS
EAI
DOI: 10.4108/eai.22-11-2017.2274317
Abstract
Presented article is focused on characteristic of WPC (Wood Plastic Composite) and monitoring the effect of variant cutting conditions during technology of mill-ing on result amplitude parameters describing surface topography (Ra and Rz) – after machining of WPC with natural fibers (material is combination of two dif-ferent phases – the plastic matrix and wood flour, what is material with properties of plastic with wood appearance). Measuring is realized by roughness testers, where have to be consider about inhomogeneity of WPC material (70 % of wood fill and 30 % of HDPE matrix). From the result, the surface roughness is mostly influenced by feed rate.
Copyright © 2017–2024 EAI
