Proceedings of The 2nd International Conference On Advance And Scientific Innovation, ICASI 2019, 18 July, Banda Aceh, Indonesia

Research Article

Development of Low Cost Recycled HDPE Filament Extruder for 3D Printing Filament

Download445 downloads
  • @INPROCEEDINGS{10.4108/eai.18-7-2019.2288536,
        author={Anis  Arendra and Sabarudin  Akhmad and Mu’alim  Mu’alim and Khoirul  Hidayat and M Adhi Prasnowo},
        title={Development of Low Cost Recycled HDPE Filament Extruder for 3D Printing Filament},
        proceedings={Proceedings of The 2nd International Conference On Advance And Scientific Innovation, ICASI 2019, 18 July, Banda Aceh,  Indonesia},
        publisher={EAI},
        proceedings_a={ICASI},
        year={2019},
        month={11},
        keywords={3d printing filament extruder recycled hdpe diameter uniformity ovalityof filament},
        doi={10.4108/eai.18-7-2019.2288536}
    }
    
  • Anis Arendra
    Sabarudin Akhmad
    Mu’alim Mu’alim
    Khoirul Hidayat
    M Adhi Prasnowo
    Year: 2019
    Development of Low Cost Recycled HDPE Filament Extruder for 3D Printing Filament
    ICASI
    EAI
    DOI: 10.4108/eai.18-7-2019.2288536
Anis Arendra1,*, Sabarudin Akhmad2, Mu’alim Mu’alim2, Khoirul Hidayat3, M Adhi Prasnowo4
  • 1: Mechanical Engineering Departement, Faculty of Engineering, University of Trunojoyo Madura, Indonesia
  • 2: Industrial Engineering Departement, Faculty of Engineering, University of TrunojoyoMadura, Indonesia
  • 3: Agroindustrial Technology Department, Faculty of Agricultural, University of TrunojoyoMadura, Indonesia
  • 4: Industrial Engineering Departement, Faculty of Engineering, Universitas Maarif Hasyim Latif, Indonesia
*Contact email: Indonesiaarendra22@yahoo.com

Abstract

This research aims to make low cost filament extruder machine to form HDPE 3D printing filament. To meet the standard of 3D printing filament quality, it is necessary to examine the effect of process parameters on filament dimension quality. So that in this research examined the influence of heating temperature and screw speed to uniformity of diameter and filament roundness. it was revealed that independently the heating temperature and the screw speed factor had a significant effect on the uniformity of diameter and filament roundness. While the interaction of heating temperature and the screw speed factor only significantly affects the filament roundness, it does not significantly affect the uniformity of diameter. Based on the research data, the regression of the roundness relationship as the function of temperature and screw speed as follows: roundness = - 0.508 + 0.00402 temperature - 0.0030 screw speed. And regression of diameter uniformity relationship as function of temperature and screw speed as follows: uniform diameter = - 0,423 + 0,00202 temperature + 0,0217 screw speed.