Research Article
Effect of Carburizing Temperature and Holding Time on Mechanical Properties Low Carbon Steel Using Schleichera Oleosa Carbonized Chorcoal
@INPROCEEDINGS{10.4108/eai.18-10-2019.2289858, author={Agustinus Deka Betan and Melsiani R.F. Saduk and Fransisko Piri Niron and Irene Budayawati}, title={Effect of Carburizing Temperature and Holding Time on Mechanical Properties Low Carbon Steel Using Schleichera Oleosa Carbonized Chorcoal}, proceedings={Proceedings of the 1st International Conference on Engineering, Science, and Commerce, ICESC 2019, 18-19 October 2019, Labuan Bajo, Nusa Tenggara Timur, Indonesia}, publisher={EAI}, proceedings_a={ICESC}, year={2019}, month={12}, keywords={carburizing temperature shear strength schleichera oleosa charcoal}, doi={10.4108/eai.18-10-2019.2289858} }
- Agustinus Deka Betan
Melsiani R.F. Saduk
Fransisko Piri Niron
Irene Budayawati
Year: 2019
Effect of Carburizing Temperature and Holding Time on Mechanical Properties Low Carbon Steel Using Schleichera Oleosa Carbonized Chorcoal
ICESC
EAI
DOI: 10.4108/eai.18-10-2019.2289858
Abstract
The sloping fastening bolt on the lathe functions to connect the top slide component with the carriage mechanically. Damage to the bolt is more due to the accumulation of cutting forces that occur. To prepare spare parts in accordance with the specifications of the mechanical properties of the original bolt lathe needs to be done research. Low carbon steel was chosen as an alternative for making bolts for the replacement of component parts from the Harison T 300 lathe. Improved mechanical properties of low carbon steel carried out the carbonization process of schleichera oleosa charcoal with a holding time of 1 hour, 1.5 hours, 2 hours using a temperature variation of 800oC, 850oC, 900oC in water and oil quenching. Experimental results prove that the best shear strength occurs at a temperature of 800oC, withstands 1 hour with quenching of used oil of 11396 N / mm²