Proceedings of the the 3rd Annual Conference of Engineering and Implementation on Vocational Education, ACEIVE 2019, 16 November 2019, Universitas Negeri Medan, North Sumatra, Indonesia

Research Article

Analysis of Mechanical Properties and Micro Structure of Body Valve Bolts, Alloy Steel Grade B7 Material as a Result of Offshore Application

Download542 downloads
  • @INPROCEEDINGS{10.4108/eai.16-11-2019.2293111,
        author={Qamaruddin  Qamaruddin and Mochamad Iwan Nur Irawan and Dwi Wahyuni Wulandari and Iskandar Adji Purnomo},
        title={Analysis of Mechanical Properties and Micro Structure of Body Valve Bolts, Alloy Steel Grade B7 Material as a Result of Offshore Application},
        proceedings={Proceedings of the the 3rd Annual Conference of Engineering and Implementation on Vocational Education,  ACEIVE 2019,  16 November 2019, Universitas Negeri Medan, North Sumatra, Indonesia},
        publisher={EAI},
        proceedings_a={ACEIVE},
        year={2020},
        month={3},
        keywords={mechanical properties micro structure body valve bolts alloy steel grade                      b7},
        doi={10.4108/eai.16-11-2019.2293111}
    }
    
  • Qamaruddin Qamaruddin
    Mochamad Iwan Nur Irawan
    Dwi Wahyuni Wulandari
    Iskandar Adji Purnomo
    Year: 2020
    Analysis of Mechanical Properties and Micro Structure of Body Valve Bolts, Alloy Steel Grade B7 Material as a Result of Offshore Application
    ACEIVE
    EAI
    DOI: 10.4108/eai.16-11-2019.2293111
Qamaruddin Qamaruddin1,*, Mochamad Iwan Nur Irawan2, Dwi Wahyuni Wulandari1, Iskandar Adji Purnomo1
  • 1: Sekolah Tinggi Ilmu Maritim (STIMar) “AMI” Jakarta
  • 2: Universitas Islam “45” (UNISMA) Bekasi
*Contact email: qamaruddin@stimar.ac.id

Abstract

The objective of this research is to examine the mechanical properties and micro structure of body valve bolts using the alloy steel grade B7 material after being applied for more than 12 months on offshore location. The experimental steps conducted in the research were specimens check based on maker specification, preparation of specimens, tensile and hardness tests for mechanical properties and metallography for micro structure, analysis and conclusion. The total specimens were 18 bolts. Based on the research, it was found that the tensile strength 94.9 kgf/mm2 and hardness 30.0 HRC, the micro structure was consisting of ferit and pearlit. Comparing the result of testing of the used bolts to the new ones and the standard ones by ASTM A193, it can be concluded the used bolts remained applicable on condition that there is no defect and corrosion existing.