Research Article
Design and Implementation Supervisory Control and Data Acquisition (SCADA) of Filtration Process of Water Treatment Plant (WTP) by Using Raspberry PI
@INPROCEEDINGS{10.4108/eai.11-7-2019.2297520, author={Sayidha Larasati and Eki Ahmad Zaki Hamidi and Mufid Ridlo Effendi}, title={Design and Implementation Supervisory Control and Data Acquisition (SCADA) of Filtration Process of Water Treatment Plant (WTP) by Using Raspberry PI }, proceedings={Proceedings of the 1st International Conference on Islam, Science and Technology, ICONISTECH 2019, 11-12 July 2019, Bandung, Indonesia.}, publisher={EAI}, proceedings_a={ICONISTECH}, year={2021}, month={1}, keywords={filtration raspberry pi scada}, doi={10.4108/eai.11-7-2019.2297520} }- Sayidha Larasati
Eki Ahmad Zaki Hamidi
Mufid Ridlo Effendi
Year: 2021
Design and Implementation Supervisory Control and Data Acquisition (SCADA) of Filtration Process of Water Treatment Plant (WTP) by Using Raspberry PI
ICONISTECH
EAI
DOI: 10.4108/eai.11-7-2019.2297520
Abstract
Water is a basic need important for humans. Raw water suitable for daily use, is not enough to just clean and clear presentation. But the quality also needs to be tested. The water quality be tested in Water Treatment Plant (WTP). Which one important step in WTP process is filtration. Filtration is instead to filter out suspended solids in water. To realize good water quality, must do check PH. Supervisory Control and Data Acquisition or SCADA is which one system can do that thing. SCADA system program among other is controlling, monitoring and data acquisition. Raspberry Pi is a mini computer which make SCADA system program in filtration process with the others component like a pump and Sensor SKU:SEN0161. the pump is applied to move water in filtration process and SKU:SEN0161 will checking pH water after filtration process. All components are controlled by Raspberry Pi. There are 4 samples of water used before entering the filtration with different pH values. There are 6.0, 6.2, 8.8 and 9.0. 4 samples were varied again with 3 variations volume of water, there are 1L, 3L and 5L in certain time. The above water sample is fed into the filtration and when checking the pH value, the result is in accordance with the parameters which are between 6.5 - 8.5. The results will be displayed and stored on web by Raspberry Pi.