The Proceedings of the 1st Seminar The Emerging of Novel Corona Virus, nCov 2020, 11-12 February 2020, Bali, Indonesia

Research Article

RETRACTED: Fuzzy Logic Based Industrial Control System Design

Download453 downloads
  • @INPROCEEDINGS{10.4108/eai.11-2-2020.2301971,
        author={Abdul Latif and Rahmat Jalaluddin and Susilo Ari Wibowo},
        title={RETRACTED: Fuzzy Logic Based Industrial Control System Design},
        proceedings={The Proceedings of the 1st Seminar The Emerging of Novel Corona Virus, nCov 2020, 11-12 February 2020, Bali, Indonesia},
        publisher={EAI},
        proceedings_a={NCOV},
        year={2020},
        month={11},
        keywords={scada fuzzy serial port rs232 dc servo microcontroller},
        doi={10.4108/eai.11-2-2020.2301971}
    }
    
  • Abdul Latif
    Rahmat Jalaluddin
    Susilo Ari Wibowo
    Year: 2020
    RETRACTED: Fuzzy Logic Based Industrial Control System Design
    NCOV
    EAI
    DOI: 10.4108/eai.11-2-2020.2301971
Abdul Latif1,*, Rahmat Jalaluddin1, Susilo Ari Wibowo1
  • 1: Sekolah vokasi Electrical Engineering Department at Universitas Muhammadiyah Yogyakarta, Indonesia.
*Contact email: ari_susilo_wibowo@umy.ac.id

Abstract

RETRACTED: Fuzzy logic controller is an alternative modern control system that is easy because it does not need to look for a mathematical model of a system, but still effective because it has a stable response. The training module that has been designed using a DC servo motor and heater is controlled by an 89S52 microcontroller and the method of regulation used is fuzzy logic with a supervisory system using MMI software. The system created is a minimal system from SCADA because there is only one PC that is a data client. Fuzzy logic is designed to have two inputs (Err and ΔErr) and one output (Δton). Each membership function has 5 labels. The motor driver (motor driver) uses a PWM system (pulse width modulation) and the heater driver uses a proportional power control system. Input point setting is done through the SCADA software that is sent to the microcontroller via the computer's RS232 serial port. The system response testing is carried out on a number of setting point variations and load variations. From the data obtained shows that the system response is quite fast in pursuing the setting point value both in various variations, namely the load and setting point. Fuzzy logic is one of the redundant or fault tolerant control systems, which means the fuzzy logic controller can still work with a reduction in some rules, or if there are small errors in programming, without any significant changes.