Research Article
Numerical Simulation of Dual Laterolog Response Based on Wireless Communication Technology
@INPROCEEDINGS{10.1007/978-3-031-50546-1_21, author={Hongbo Xiang}, title={Numerical Simulation of Dual Laterolog Response Based on Wireless Communication Technology}, proceedings={Advanced Hybrid Information Processing. 7th EAI International Conference, ADHIP 2023, Harbin, China, September 22-24, 2023, Proceedings, Part II}, proceedings_a={ADHIP PART 2}, year={2024}, month={3}, keywords={Wireless Communication Technology Dual Laterolog Response Numerical Simulation}, doi={10.1007/978-3-031-50546-1_21} }- Hongbo Xiang
Year: 2024
Numerical Simulation of Dual Laterolog Response Based on Wireless Communication Technology
ADHIP PART 2
Springer
DOI: 10.1007/978-3-031-50546-1_21
Abstract
The current numerical simulation of dual laterolog response is mostly unidirectional, and the efficiency of numerical simulation is low, resulting in high resistivity and potential safety hazards when conducting potential processing. Therefore, the design and verification research of the numerical simulation of dual laterolog response based on wireless communication technology are proposed. Firstly, the feature extraction of numerical simulation is carried out, and the multi-level method is adopted to improve the efficiency of numerical simulation, realize multi-level grid generation of dual laterolog, establish a wireless communication numerical simulation model, and implement numerical simulation by boundary constraint processing. The final test results show that the measured resistivity is well controlled below 7 in combination with the electrical coefficient of each set point through numerical simulation processing at the depths of 1.1 m, 1.3 m, 1.5 m, 1.8 m, 2 m, 2.3 m, 2.5 m and 3 m, which indicates that this numerical simulation has relatively large coverage and strong pertinence, it has practical application value to optimize the unit simulation structure, improve the efficiency and quality of the overall numerical simulation, and minimize the difference in the simulation process.
