2nd EAI International Conference on Management of Manufacturing Systems

Research Article

Evaluation of hardness parameters of TiCN coating

Download623 downloads
  • @INPROCEEDINGS{10.4108/eai.22-11-2017.2274676,
        author={Frantisek Botko and Michal Hatala and Pavol Beraxa and Andrej Czan and Darina Duplakova and Jan Zajac},
        title={Evaluation of hardness parameters of TiCN coating},
        proceedings={2nd EAI International Conference on Management of Manufacturing Systems},
        publisher={EAI},
        proceedings_a={MMS},
        year={2018},
        month={3},
        keywords={coating steel s600 hardness indentation},
        doi={10.4108/eai.22-11-2017.2274676}
    }
    
  • Frantisek Botko
    Michal Hatala
    Pavol Beraxa
    Andrej Czan
    Darina Duplakova
    Jan Zajac
    Year: 2018
    Evaluation of hardness parameters of TiCN coating
    MMS
    EAI
    DOI: 10.4108/eai.22-11-2017.2274676
Frantisek Botko1,*, Michal Hatala1, Pavol Beraxa1, Andrej Czan2, Darina Duplakova1, Jan Zajac1
  • 1: Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Bayerova 1, 080 01 Presov, Slovakia
  • 2: Faculty of Mechanical Engineering - University of Zilina, Univerzitna 1, 010 26 Zilina – Slovakia3
*Contact email: frantisek.botko@tuke.sk

Abstract

. Presented article is focused on surface treatment technology depositing the thin, abrasion-resistant hard coatings on the surface of tools by CVD (Chemical Vapor Deposition) coating technology. To determine the appropriate coating layers and the substrate itself (tool material) is necessary to know the stress and deformation of the product in the forming process. In our case, after the determination of these parameters the tool (former) material Bohler S600 in combination with the application of TiCN coating by high temperature CVD process was selected. Experimental tests were performed to determine hardness. Tools with CVD coating have been used in real operating conditions in the production of seamless steel reducers.